The things we need to care when we do the acrylic products

The things we need to care when we do the acrylic products

I believe we all know that in the current acrylic market, acrylic display is very popular with everyone, mainly because of acrylic display rack has many advantages. Because of this, the acrylic display market is very good, which led to a lot of manufacturers are mass produced acrylic display rack. In fact, the production of acrylic display rack is not so easy, there will be many problems. So, in the production of acrylic display rack in the process of what will happen? Many people do not understand at all. Below, let us find out together!

Usually in the production of different shapes of products, the need to use laser machine carving, in the process of carving, the laser will occur very high temperature, slightly less attention to the acrylic plate may point, so polish, there is a certain demand Looking at someone, after the fire extinguished in a timely manner, but also to prevent the laser machine was burned.

As usually thick acrylic plates are directly carved with CNC engraving machine, so there will be a lot of burrs, acrylic display manufacturers to polish the grinding is to remove these burrs, remove the burr, you can polish. However, when many people do not go to eradicate burrs at the time of production, they will polish directly and the effect will be much worse.

Usually thin are flame polishing, high demand with the cloth wheel polishing, the thickness of the diamond on the choice of polishing. Many acrylic display manufacturers in order to cut corners jumped, do not use diamond polishing, cloth polishing directly or flame polishing, the role will be much worse!