How to judge the quality of plexiglass good or bad

How to judge the quality of plexiglass good or bad

As a plasticity polymer materials, plexiglass nowadays in the construction industry can be described as more and more widely used. Nowadays, there are many kinds of plexiglass products on the market such as acrylic boxes and so on. It is not an easy task for people to choose good and suitable products. In this regard, then I come to discuss with you how to judge the quality of acrylic.

1. Observation 

The so-called observation method, in fact, this is based on the characteristics of plexiglass itself to judge. In general, we need to observe whether there are serious acrylic or faded gloss is not high enough transparency, etc., if there is, so long that the quality of plexiglass is not good.

2. Light transmission 

What we need to know is that the principle of the light transmission method is that plexiglass has an extremely high light transmittance and the light after passing through is white light and does not absorb the light color. An identification method is derived from the plexiglass case, The white light, if you find yellow or bluish, it shows that there is a problem.

3 hot melt 

Hot melt method, also known as the paste method, the principle is to make good use of plexiglass sheet and the second of the acrylic sheet paste degree is not the same to distinguish. Acrylic sheets of inferior quality will be stuck together after hot-melt, and acrylic sheets of good quality will be easily separated.

4.Touch 

I believe we all know that a good plexiglass surface bright colors, hand touch up a sense of creamy, if there is a sense of lime on the surface, there will be some small pores, such material calcium more toughness, so long it is not recommended Picked up.

What I want to tell you is that there are actually many ways to identify the quality of plexiglass. The above introduction is just a part of it. We are in the process of product selection, I hope you can use the above content as a reference, so pick to really satisfy their own products.