How to avoid the deformation of acrylic display?

How to avoid the deformation of acrylic display?

We can see all kinds of acrylic display in various shopping malls exhibition, the acrylic display in the process of production are to be very careful, otherwise there may be an acrylic display deformation of this kind of situation, how can we prevent this from happening? The following is by the acrylic exhibition shelf manufacturer Kim zhong to give you a brief explanation.

1. When making, choose acrylic sheets with appropriate thickness to avoid bending deformation.

2. There must be some expansion space in the installation.

3. Avoid scratches during processing.

4. The thermal deformation temperature of acrylic sheets is about 100 degrees, and the continuous use temperature should not be higher than 90 degrees.

Above is what we in the production of acrylic exhibition stand to focus attention, when we use the acrylic substantially, to increase the thickness of sheet to prevent sagging deformation due to gravity, hot forming can improve the impact strength. Choose the types of acrylic exhibition stand weight appropriate acrylic, not too thick, also cannot too thin, so you can correct to avoid caused by plate bearing and the product does not conform to the deformation in the process of production.